For excellent internet stability home or work area, the configuration of the switch is required so that each one receives an optimal degree of connection. Therefore, it requires configuring the switch correctly to achieve it.
In this way, the cabling is responsible for constituting the local area connection networks within the same space. If you don’t know what LAN is and how it works, you can find out about it.
The correct operation of each of the aspects will depend directly on the number of teams that are connected to the switch’s distribution network.
Why use a switch in your business or home?
Routers establish the connection without the need for physical media and limited space, while switches they transmit the Internet through cables. This in order to give it better stability and speed needed with a distance limit.
Currently there are routers capable of offering the connection by cable and by wireless means. Helping Internet networks reach anyway. However, these types of accessories have a connection limit of 4 devices wired at the same time. These are defined as recommended household switches.
The desire to connect more than two computers through Internet cables is due to the fact that through this means it can be ensured that the connection speed provided by the network is maintained. There are those who increase the speed of the internet using VPN, you could give it a try and see how it goes.
For this, the switch, who are who are responsible for connecting the network segments, sending data and removing the connection automatically when it ends.
You may also be interested in:
How to configure the switch correctly to get more computers to connect?
As is well known, switches go far beyond those that work in domestic areas, as their connection architecture is highly variable. If it was a D-Link switch, the process to configure the static IP address is easier.
Each can be adjusted according to the degree of need for connection required by the user or the company that is going to acquire the tool. In the case of wanting to configure a domestic switch that ranges from 4 to 8 connection portsYou should know that you do not need a lot of technical knowledge to achieve it.
Steps prior to network configuration
You will start by connecting the computer to the router through an Internet cable, setting it to the proper port for both. The switch works with a voltage of 210 to 230 volts, so you can connect directly to any electrical connection you have in the home.
First you must make sure that the computer you have connected is receiving the Internet connection. Optionally, you can measure your internet speed to see if there is any difference after you finish configuring the switch. You will proceed to connect the rest of the equipment to the switch that make up the domestic or business area by means of the necessary wiring.
Configure the switch correctly over the local network
Mainly make sure the switch is connected to a power source to receive energy and turn it on.
Once each of the computers that want to be connected to the LAN are coupled to the switch, you only need to download an application called “IPMessenger or Dukto”That function as cross platform solutions.
This program must be installed on each of the computers that are connected to the switch. In this way achieve configure the IP of each in sequence. You must turn off the Internet connection if it is on, to start configuring one by one:
You may also be interested in:
- The computer that is connected to the first port of the switch will be assigned the IP: 10.0.0.1, Router / Gateway – 255.255.255.0, DNS – 10.0.0.10.
- The one that is coupled to the second port will have the IP: 10.0.0.2, Router / Gateway – 255.255.255.0, DNS – 10.0.0.10.
When you open the application, you will find the series of equipment that are connected to it to confirm the correct assembly of the network.
I'm sorry this content was not useful for you!
Let me improve this content!
Tell me, how can I improve this content?