- 1 What is the front panel of the motherboard?
- 2 How to connect the front panel cables of the motherboard of my PC?
- 3 Recommendation about the “SPEAKER” connector
Connecting the cables from the front panel of the motherboard is essential for using the PC’s on / off switches, the hard drive LED, activating the front USB ports, and other functions. In this article we explain How to connect the front panel cables of the motherboard of my PC
What is the front panel of the motherboard?
Have you ever wondered what the motherboard is and what is it for? This is the operations center that contains a series of slots and connectors. It contains a front panel with a set of pins that allow the cable connection In order to turn on the computer, use the LED indicators on the case, activate the front USB ports and use the speaker or internal speaker to infer possible errors in the motherboard.
The cables or connectors of the computer case (chassis)
The equipment cabinet It contains an “HDD LED” cable or the hard disk light indicator, a “POWER LED” cable which is the power indicator of the equipment, a “POWER SWITCH” cable to turn the computer on and off, a “SPEAKER” cable to the internal speaker and a “Reset SW” cable for the “Reset” button.
How to connect the front panel cables of the motherboard of my PC?
The procedure for connecting the motherboard front panel cables It is not complex but must be done with care. For this reason, it is convenient that you follow the steps that we indicate below so that you can complete this task successfully and without any inconvenience.
Open the cabinet or case
First of all, you must open the cabinet or case. To do this, wear an antistatic wrist strap and get a screwdriver. Loosen the screws holding the case cover, remove the cover and set it aside. Make sure to change the motherboard BIOS battery if you notice that the date on your computer is constantly changing.
Prepare the USB cables
Remove the tie that binds the USB cables on the front of the case. Later, separate individual pin connectors in order to display the name of each one.
You may also be interested in:
Locate the motherboard connection panel
Often the motherboard patch panel is in the lower right part of it. You can easily identify it because each pin is labeled with the name of a connector. Some motherboards have the word “PANEL” on the side of this header.
Recognizes the load of the cables
Some cables have negative or positive value printed on them regarding the load. If your cables don’t indicate it, you can be guided by the color. The white wires represent the negative charge, while the other colors are positive. If both cables are black, check that the connector name is pointing outward.
Connect the cables to the motherboard
Each pair of cables should be connected exactly where the motherboard patch panel indicates. Depending on the model and type of plate you will see that in most connector name is abbreviated, replacing “POWER SWITCH” with “PWR SW” or “POWER LED” with “P LED”. This is due to the limited space on the motherboard. You can take advantage of this step to repair and install the power button if you think the component is faulty.
Connect connect the cables from the front panel of the motherboard of your PC
Commonly, the USB 2.0 cable has nine pins and a blinded pin so that we can connect it only one way. On the motherboard you can see the connector labeled “USB”. The USB 3.0 cable has twenty pins and you can connect it to the blue connector located at the bottom right of the board.
Importantly, the USB 3.0 cable must also be connected one way. For this, check the protrusion (male connector) and the indentation where this protrusion fits.
Recommendation about the “SPEAKER” connector
The “SPEAKER” cable must be connected to a connector on the motherboard that consists of four pins even though this cable only has two. The “SPEAKER” connector is optional but it is very useful for the diagnosis of the motherboard since it emits different sounds or beeps when it presents a fault. Therefore, whether or not you have one of the best types of motherboard, you should know that all of them share the same front panel.
You may also be interested in:
I'm sorry this content was not useful for you!
Let me improve this content!
Tell me, how can I improve this content?