How to Connect Two Computers with a USB Cable to Transfer Data

Sometimes we would like to connect two computers to an external hard drive via two USB outlets, but we don’t have this type of component and we don’t have enough time to do this. In this sense, it is convenient to use a USB cable that allows you to link two computers simultaneously and quickly. This article teaches you how to connect two computers with a USB cable to transfer data

What is a USB jumper cable?

A jumper cable is a USB to USB connector that allows two computers to be linked. This accessory allows data to be transferred between the two computers through an electronic circuit that is located in the center of the cable.

The jumper cables come with an installation CD that contains a executable file. By installing this element you will be able to successfully establish a communication between the two computers that you want to connect.

What is a USB jumper cable for?

A bridged USB cable is used to transfer data from one PC to another effectively. With this tool You save time and materials, since you don’t need to download an additional app or get an external device. In addition, data transfer via USB is done quickly.

Connect two computers

How to connect two computers with a USB cable to transfer data

If you want to establish a link between two computers, you have two options: configure and connect virtual machines via Wi-Fi or external network in virtual box or use a special USB cable called “bridge cable” or “USB link cable” that has two USB male connectors. If you opt for this last alternative, pay attention to the procedure that we explain below.

Prepare the two computers

First of all, you must turn on the two computers you want to connect and make sure they both complete the startup process properly.

Install the application from the CD

Insert the installation CD into the CD / DVD drive of one of the computers. Later, wait for the installer to run automatically. In case it does not start the installation on its own, browse the contents of the disk and locate an executable file called “Installer” or “Setup”.

My USB bridge cable does not have an installation CD

If the jumper cable you purchased does not have an installation CD, you must access the website of the manufacturing company and look for the “Downloads” or “Drivers” section. From there, download the installation file that corresponds to the jumper cable (link or transfer) and install the program on one of the computers.

USB cables

Connect the two computers with the USB cable to transfer data

Once you have installed the program, you must link the two computers using the USB bridge cable. To achieve this, insert one end into the USB port of PC 1 and the other end into the USB port of PC 2. Wait a few seconds while the computers recognize the cable.

Check that the USB cable I’m not very tense. If so, try moving the two teams closer together to avoid possible cable damage.

Open the application to transfer data via USB cable

Access the app that you installed in the first step. To achieve this, locate the program from the start menu. Then, locate the “All applications” section and choose the program that you will find in the available list.

The application for data transfer works as a file manager. Its interface contains two windows “local” and “remote” that are associated with each computer. The “local” window shows the files from the PC you are using while the “remote” window shows the files from the other PC.

Transfer the data between the two computers

To share files between the two connected computers, you need to drag the files from the “remote” window to the “local” window. Also, you can do the reverse process without any problem. In case you do not have a Windows system and you prefer to use another option, you can choose to connect two Mac computers with ethernet. This process will be equally useful for transferring data.

How useful did you find this content?

Click on a star to rate!

Average score 0 / 5. Counting of votes: 0

So far, no votes. Be the first to rate this content.

I'm sorry this content was not useful for you!

Let me improve this content!

Tell me, how can I improve this content?

Deja un comentario