There are certain technical data that you surely do not know and you wonder why USB cables are so short and this has a logical explanation that supports it, regardless of the type of USB cable. And this has to do with the effectiveness of the data they transmit, the longer the cable, the lower its effectiveness. This is why in the following article we are going to show you a very simple way to how to extend the USB cell phone extension without losing the signal easily.
To avoid this and the connectivity between devices is maintained, there are different tools that we can use. Such as network converters, extension cables, Wireless USB, with which the range of the connection can be expanded. And then we are going to describe in this guide how you can use each of these external peripherals.
You may also be interested in:
We ask that you please do not be alarmed, nor think that performing this procedure is for people who are knowledgeable about the tecnologic world. None of that, we have already shown you in other articles how easy and fast it usually is, where we have been able to connect two computers using this same type of USB cable for data transfer.
How to extend the USB extension for cell phone without losing the signal easily
To begin, we are going to talk about how to lengthen the USB extension, making use of a USB extension cable. The first thing we are going to do is disconnect one of the standard USB cables from your computer and now we will connect this end that we will call male to the female connection of the extension cable.
Now you must connect the male end of the cable to the device, in this case to the mobile, this type of cable can have a length of no more than three meters. And they are perfectly manufactured to compensate for the loss of efficiency. They can also contain different ports and allow multiple connection.
Now we are going to use a USB extender, and the first thing we are going to do is connect the extender to the computer through the USB port.
And then you need to plug an ethernet cable into the extender’s port, now you need to run the USB cable between the extender’s receiver and the device. The other end of the Ethernet cable and connect it to the receiver
These types of extenders are very suitable for connecting devices that are far apart up to 50 meters. Since they use to transmit the data to the Ethernet cables and not to the USB cables.
Another method to extend the USB extension for cell phone without losing the signal
Another method that we are going to use is to extend the USB connection via a USB over IP converter. And to begin we disconnect one of the ends of the standard USB cable, then we connect it to the IP converter. Now take an Ethernet cable and connect it to the port of the IP converter and take the other end and connect it to your network device.
These devices are recommended when you want to connect to a network by means of a USB Cable. And the distances vary depending on the length of the USB cable and the Ethernet cable, which you are using for the connection.
The next method that we will use to extend the USB cell phone extension without losing the signal is through a wireless USB device.
To connect it we are going to do the following, we are going to take the wireless transmitter and we must connect it to a Hub device. The next thing you should do is adjust the permissions of the devices, so as not to have problems with the signal.
By using this equipment we can wirelessly connect different devices that can be connected in this way. The important thing about this type of connection is that you can move freely, since it is free of cables.
It can support distances up to 10 meters but we recommend being at least three to enjoy a good sign.
In this way we have shown you the different ways that exist to be able to extend the USB cell phone extension without losing the signal easily.
I'm sorry this content was not useful for you!
Let me improve this content!
Tell me, how can I improve this content?
You may also be interested in: