As you use your Mac computer, it may present some type of failure at some point, which prevents its proper functioning. An example of these situations is when your Mac fails to «boot» or turn on.
Much of the time this happens, the cause is unknown, since there is a wide margin of error that can be synthesized in problems of the hardware or software that compose it.
The products of the Apple company, especially computers, have the reputation of being high-performance equipment, so such a situation is usually strange. In any case, this is not a reason to trust yourself, so in this article we will talk about the possible solutions that will help you recover your computer.
Make sure your Mac doesn’t really turn on
You may also be interested in:
Switching on and starting are two very different functional aspects. Well, it may happen that the equipment does not turn on at all, or simply is not able to carry out the process properly.
To verify, press the power button and be on the lookout for possible signals sound or lights that the computer can emit. If none of this happens, check that the computer is properly connected to the power outlet, in the same way as if it is a laptop, that its battery is charged and correctly installed.
For these situations it is sometimes necessary to disconnect all devices connected by USB cables, as they can also cause these types of problems. It is always advisable to keep a backup of your computer and documents in case of presenting such situations.
Can’t start your Mac computer? Try to fix software problems
One of the reasons a computer may stop turning on is that its functionalities directly affect such procedure. So, try the following solutions:
Reset RAM memory parameters
Inside the computer it is known by the acronym of PRAM, which is nothing more than the storage site for those data and settings that have been applied to the equipment. To get started, turn on the computer and instantly enter the key combination «Command + Option + P + R”.
You should keep the keys pressed while the Mac restarts, since after the power-on sound is heard for the second time, that is when you can release them. From there you will be able to evaluate if the computer acquires the indicated operation again.
Start the computer in Safe Mode
In case the previous solution has not achieved anything, you can always try the Safe Mode that comes with the computer. Through this method you can run utilities that will get your Mac back to working order, either by running solutions, deleting corrupt files, among other things.
You can enable it if you turn on the computer and hold down the key «Shift» until a blue screen appears. If you can start using this shortcut, it is because Safe Mode has already taken care of correcting the software failures, so you will only need to restart the computer and continue using the computer as you did regularly.
Do you consider it to be a hardware problem?
As you use your Mac computer, it will gradually deteriorate, so perform periodic maintenance It is recommended to avoid these situations and others in the future.
Since the equipment cannot turn on, it is recommended that you verify that the HDD stay connected in the correct way, otherwise you can try to test it on another computer.
If you finally get a positive answer in none of the options, unfortunately you will need to buy a new hard drive to use the computer again, although without the information you had previously stored.
In conclusion to the above, although the Mac system is highly recommended and with few proven failures, it does not indicate that they never have an expiration date. Therefore, perform proper equipment maintenance from time to time it will help you to extend its operation, as well as keep backups on hand.
Only in this way will you be able to avoid this type of inconvenience, inconvenience and even exaggerated expenses to recover this type of device.
I'm sorry this content was not useful for you!
Let me improve this content!
Tell me, how can I improve this content?
You may also be interested in: