How to Set Up and Use the DirecTV Remote Control to Control Your Android Smart TV How Does It Work?

If you are an affiliate of the satellite company Directv, you will surely want to know how you can configure the remote control to control your Android Smart TV; since the telecommunications company has a wide and varied system that allows the user to enjoy the programming they like the most in various qualities, among which HD stands out. To learn more about programming, go to the official Directv portal.

In general, Directv has a universal control suitable and compatible with the vast majority of televisionsIt also includes a manual that can be downloaded online that explains in a few steps how to configure it; since you only have to turn on or enable the control and enter a code that can be shared with your television and these will be linked.

directv and its application

How to set up Directv remote control

To start you should know that the Directv remote control can control multiple devices, among which the televisions or Smart T stands out; In the case that you want to control the programming and the volume of the equipment by means of the remote control that the company offers you, you will have to do the following.

First of all if you have a universal remote control You must choose what you want to control either Directv, TV, AV1 or AV2. In case you still cannot control the volume level, proceed as follows.

Enter the menu option, this option is on the remote control you will easily distinguish it, when selecting it, several options will be displayed and you must choose the one that says setting, then remote control and finally program remote. At this point you will only have to choose the device to link, such as the TV, in case you do not get the code that consists of 5 digits, you can activate the automatic search for it.

On the other hand, if you have another signal operator such as Movistar, you can enter and see how to access or activate the account in Movistar Plus.

application options

How to transform my device into a Directv control

Currently there are many means to enjoy all the family’s favorite programming, it is no longer necessary to have a subscription to cable or satellite antenna to have your favorite channels such as Disney Plus.

However, if you are one of the users who still have the daily programming provided by companies such as Directv, I will tell you that you can control your television and the programming using your smart device, be it tablets or Smartphone.

To do so, you will simply have to verify that you have a certain range or devices, which will be the HR20 and higher models. If this is your case, get ready to enjoy the advantages that this option will offer you.

But first you must download the Directv application that will allow you to control your Smart TV; when downloading it you will only have to open it for later select the Android TV section which will indicate that you can use it as a remote control, but not before finishing the configuration that the device will indicate to you.

Finally, it should be noted that for the link between your smart device and your Smart TV to work, both must be connected to the same Wi-Fi network simultaneously. In case you cannot link them, it is recommended that you verify the signal, since this you will need to issue a code or PIN on the Smart TV screen which will help you link the smart device with the TV by selecting the synchronization option.

On the other hand, if all these procedures seem very complicated, remember that you can use the universal control of the company; or you will simply have the option to switch to other platforms with the best movies and series like the ones you’ll find on Netflix.

How useful did you find this content?

Click on a star to rate!

Average score 0 / 5. Counting of votes: 0

So far, no votes. Be the first to rate this content.

I'm sorry this content was not useful for you!

Let me improve this content!

Tell me, how can I improve this content?

Deja un comentario