Steps to Configure NoteBook Keyboard – Simple Guide

The keyboard of a laptop, also known as NoteBook, is an essential complement for the proper functioning of the equipment itself.

Because of that, many people look for the fastest and most efficient solutions When it comes to presenting any problem related to an element, and in case it has been misconfigured for no reason, today you will discover the solution.

Similarly, many users are unaware of the ways in which this element can become deconfigured; Well, even trying to adapt the use of the special keys of a keyboard, a command can be confused and directly affect this aspect.

Here we will explain how you can troubleshoot if you have a misconfigured keyboard, We will start by telling you the possible solutions when the problem is in software and later we will also tell you what you can do in case it is in the hardware.

How to troubleshoot my NoteBook keyboard software problems

We will start with some more basic solutions; Among them are the ones you can go to in case your language has been misconfigured and you are not writing correctly. Well, there are several options that you can perform and thus try one by one until you can solve it.

keyboard connected laptop laptop

Alt + Shift: This is one of the fastest methods to solve this problem and for this you only have to press the Alt + Shift keys at the same time.

It is a shortcut that Windows has which automatically alternates the languages ​​that you have configured in Windows; in case you have put the keyboard in English, you You can press this command until it goes back to Spanish.

After you have set your preferred language, just try the keyboard utility; either by typing in any window or by using command commands, such as those that enable or disable the NoteBook’s cameras.

Change the language from the taskbar: Previously we had mentioned that the small rectangle that is located at the bottom, top or side (depending on the type of operating system that is handled) of the screen, is called the task bar.

Another way just as fast as Alt + Shift, is to press on the language button that you have in the Windows task bar. At the bottom right; Between the volume icons and the clock, you will see an indication of the language you are using on your keyboard. If you press on it you can see which ones are installed and change.

In the event that you have selected the Spanish language, but visibly your keyboard is not writing in that language; try selecting another language. That is to say change the settings that are set and then again select your native language. Just as if you were turning it off and on again.

configure notebook keyboard

Use language settings: You can also try entering the Windows configuration, once you are inside you must click on the time and languages ​​option. After you are within this time and language option; Go to the left column of the screen and click on the language section, which is in third place.

Afterwards, you will enter a screen where the first thing you will be displayed are the languages ​​that you already have configured on your Windows keyboard or in the applications. Exactly below these options, you will get the list of preferred languages. The preferred language you have in the first place is usually the one you are using; and if you press on one of them you can raise or lower them to order them to your liking.

It should be noted that it is possible that for some reason, your keyboard layout has been misconfigured, what makes it in Spanish but in another language. To do this, you just have to choose your language in the preferred section and click on options. When doing this, look in the keyboard section where you should find Spanish QWERTY.

On the other hand, if not, you will have to add a keyboard to add it; since the normal thing is that you need it to write in Spanish from Spain.

You may also be interested in:

In case none of the previous solutions have worked so far, you have the option to open the start menu of your computer, and find there the option of “Control Panel”.

In the window that will be displayed on your screen, you will find a bar on the upper side that is called “Seeker”; there you will find the word “Languages”And find the options that will allow you to configure them.

Once you have entered the languages ​​section, you will be able to open the details of those that are installed on the computer, which will vary depending on the characteristics of the laptop you use.

add notebook keyboard

For example, those that handle the symbol of “@“In number two, they are determined under the language”Spanish – Spain“, While those that can locate it in the letter Q are configured as” Latin American “.

If the option “English – United States” is also presented, it must be established in the case of those laptops that do not have the letter Ñ. After identifying and set your keyboard languageAll you have to do is save the changes and check its usefulness.

How to fix hardware problems with my NoteBook keyboard

There are times when nothing is misconfigured in terms of the software and the The problem is in the hardware, it can be on the connection or even on the keyboard itself. Here as the first step you must do is to turn off and on again either the computer or the keyboard; but in case it still doesn’t work, try the following things.

Check for Bluetooth problems: If you have a wireless keyboard, it is possible that sometimes some exact error can leave it disabled and it suddenly stops working. In this case, what you should do and that almost always works is to enter the Windows configuration; and press on the device category.

When you are in devices, in the left column click on Bluetooth and other devices. Once here, tap on the unconfigured keyboard and press the remove devices button that appears when you select it.

Next, reconfigure the keyboard from scratch by pressing the top button to add Bluetooth or other devices.

black keyboard letters

When there are other physical problems with the keyboard: It can also happen that the keyboard is not misconfigured, but simply that some keys do not work. If this is your case, it is no longer a problem with the configuration but with the keyboard itself and it may be due to various things.

One option is that the keyboard may be dirty, Which can be said to be good news, dirt tends to accumulate under the keyboard at times, thus affecting its performance. In case it is a mechanical keyboard or it uses some kind of slot that allows you to extract the keys; It is the best option, since you can remove it one by one and thus do a deep cleaning.

And when the keys are not removable, the way to clean it is very similar to cleaning a laptop; start by blowing and then wipe a damp cloth over the top of the keys. Finally, you can use the swabs to rub between the keys until you remove the dirt between them.

Can I configure the keys on my NoteBook separately?

If our NoteBook has only one misconfigured key, if we can configure them separately. To do this, you must open Windows in start, programs and applications then in Windows accessories, on-screen keyboard accessibility; We go to keyboard options we will get NoteBook keyboard configuration and there we will have to select the key with the mouse and then it will tell us that we must press the corresponding key.

In this way, if you have a misconfigured key, or that is fulfilling the wrong function, example is a letter and a number appears will be solved and finally the key will work correctly.

Steps to return to initial setup of my keyboard

To reset the keyboard to the default settings in Windows operating systems you must perform the following steps:

  1. You must open the control panel and click on region language for Windows 7 and in case of Windows 8 and 10 on language correction.
  2. If you have more languages ​​installed in the system, or if you don’t have it, add a new one, any language will work; once this addition you must click on the new language.
  3. After changing the primary language in Windows 7, click on the Keyboard and Languages ​​tab. Then click on change Keyboards; below Default where it says input language you must select another drop-down menu. Then, click on the language to apply hit it and then press on and repeat the steps; this time selecting the initial language as the default language for the keyboard.
  4. In Windows 8 select one of the languages ​​already installed and then click on upload to set the language as the default language; and then repeat the same steps with the language initially.
    Once these changes have been made in any of the Windows operating systems, your keyboard will be reset to the default settings. This means that all the shortcuts you have customized will not work.

If you added a new language just to be able to reset the keyboard to the default configuration; you can erase it without any problem this after the reboot has been done.

How useful did you find this content?

Click on a star to rate!

Average score 0 / 5. Counting of votes: 0

So far, no votes. Be the first to rate this content.

I'm sorry this content was not useful for you!

Let me improve this content!

Tell me, how can I improve this content?

Deja un comentario