What to do if my Xiaomi Redmi does not turn on or charge? – Final solution

When you buy a mobile that is perhaps not one of the most used, you can have a complex support and warranty service. So if your Xiaomi Redmi does not turn on or charge before giving it up for lost, follow these steps and try to recover it.

Many Xiaomi users have had this problem and sometimes it has nothing to do with the equipment or battery damage. It is one of the most common among the failures, but less frequent than when the Xiaomi Redmi does not recognize the SIM card.

Pre-checks to find out why a Xiaomi Redmi does not turn on or charge

That a Redmi does not turn on or charge can be generated by various events. One of them and very common, is that the charger is defective and you just have to look for another charger.

By alternating the cable and the power connector, it will be possible to know if either of these two is the problem. It is important to check the output current of the chargers because it may be different and generate the fault if the charger is not original.

In other common cases when a Xiaomi Redmi does not turn on or charge, maybe the charging pin is dirty and does not allow proper loading. This can be remedied by cleaning the contact being careful not to damage the pins.

Xiaomi Redmi charging pin

When the phone does not receive a charge, it turns off and then does not turn on due to lack of power, therefore the mobile does not start again. Users believe that the cell phone has stopped working or it is something serious.

Sometimes, doing a hard reset or factory resetting a Xiaomi Redmi tends to leave the mobile off for a few moments. It is important to understand that this occurs because the phone takes a little time to turn on and not something related to the battery.

Steps to solve if your Xiaomi Redmi does not turn on or charge

If the above items have been verified and it is not the case of your Xiaomi Redmi, there is yet another method. Thus, you can try to fix the mobile without having to take it to a technician or take a more risky action.

Since the phone is off, the first thing to do is press the volume down button and the power button. Hold the buttons for a long time, until the pet image of the Xiaomi company repairing an Android appears and below it says “Fastboot”.

Once this happens it is important to be patient as it can take a long time to turn on. It should be noted that it is best to leave the phone and not touch any of its buttons until the image described above is finished and removed.

There is evidence that many users whose Xiaomi Redmi does not turn on or charge, this method has worked for them. However, for those who have not, they have had to take more complex ways such as reinstalling the ROM on the phone.

This is because the error is generated in the software and by not turning on it is the only way to make sure that it is not the operating system.

what to do if my xiaomi does not charge

It should be checked if the Xiaomi does not recognize the MicroSD card and fix the problem, as the Fastboot method is not always safe. However, most of the time it does not affect the operation of the phone, but it is good to take that into account.

A recommended option is that if you do not turn on with the Fastboot method, take it to an authorized agent and check if it is not the battery or the charging pin that is damaged. Because on many occasions that happens.

Source by

Deja un comentario