How To Optimize The Performance Of A Slow Ssd On Windows 10, 7 And 8? -Step By Step Guide

 optimize SSD

Storage space in a computer is one of the most important one. This, to the point that the more storage space can have the price of it can drastically raise, why must know the storage capacity of our pc.

The importance of this it has led to advances made in the ways how information is stored. Long used hard drives traditional, but these often have limitations in how space is stored, How the ROM or certain actions are performed.

How Optimize Performance an SSD Slow in Windows 10, 7 and 8? -Step by Step Guide

However, today the best of the best in the SSD hard disk or solid state. These hard drives are not worth a magnetic disk to store information, but a non-volatile memory similar to a pendrive . Best of all is that can install your hard drive on your PC SSD easily .

Compared to traditional hard drives there is an increase considerable speed on a computer. But it is usual that eventually can get a little slow. When this happens, you can optimize following what we tell you then.

data optimization ssd

What you need to know before

You may have bought a SSD, and that it is giving some problems. It is usual with certain computer parts can have a decrease in performance, but there’s technology with SSD is not very usual.

Actually, it is because there are many things that can go wrong with your performance on your computer. And, although small Details , if you take charge of them going to greatly improve the lifetime of your SSD considerably.

Given this, if you have Windows 10, you might want to do a couple of things before you start with small optimizations. The first is to update the firmware of your SSDs so you can work perfectly. This you can download from the website of the manufacturer of the same.

And on the other hand, need to check the settings of your SSD in the BIOS and change it to AHCI if you are in IDE , which is a way that can seriously affect the overall performance of the SSD even with the smallest task.

ssd in table

Performing optimizations

Now you have a little clearer what you should do in Windows 10 in order to optimize your SSD, there are other optimizations that can be done to improve the performance of the SSD. First, we can speak of hibernation.

When we speak of hibernation, we talk about a way your computer saves the last session to launch it as it is. This can be very effective with a normal hard drive but with an SSD can waste a lot of time because life cycles writing .

In this case, open a command window and enter “powercfg.exe/h off” , press Enter and go.

On the other hand, it is good to get rid of Superfetch. This is a process through which mode programs that start much faster are preloaded. However, when an SSD is used may not be as good because write cycles are used and also save RAM on our computer.

To remove Superfetch go directly to the Start menu and enter “ Services “. Here you should run as an administrator and find the option “ Superfetch ” to deactivate the same.

When it comes to saving writing cycles, is also a good idea to disable indexing unit Storage . It’s really easy to do; just go to My Computer and your SSD appears where you click right and enter on their properties. Then, just uncheck the box below that talks about indexing unit.

Deja un comentario